2007.5-2010 LMM Duramax S&B Cold Air Intake KitNew841372036576
- Minimizes air restriction and flow better than stock
- Fully enclosed airbox that protects the filter from dirt and keeps out engine heat
- Two large air inlet points
Description: - Minimizes air restriction and flow better than stock
- Fully enclosed airbox that protects the filter from dirt and keeps out engine heat
- Two large air inlet points
Item #: 75-5091,75-5091D
Condition: New
This Product Cannot Ship to the State of California
Price: $349.00
2007.5-2010 LMM Duramax Allison 4x4 Transfer Case BraceNew
Fabricated tubular steel support connects rear housing of Allison transmission to transfer case reinforcing the weaker tail housing section to eliminate flex caused by driveline vibrations which ca...
Description: Fabricated tubular steel support connects rear housing of Allison transmission to transfer case reinforcing the weaker tail housing section to eliminate flex caused by driveline vibrations which...More Details »
Item #: WCF100135
Condition: New
10-15 Business Day Lead Time
Price: $179.00
2007.5-2014 Silverado 2500 / 3500 HD - Morimoto - XB LED Fog Lights, Square (Pair)New840203362471
- FOG LIGHTS: 2x Type C Morimoto XB LED (Square)
- Color: 5500K (Pure White)
- Input: Sealed 5202 Male
- WIRING: Plug-n-Play Connection Kit
- OPTICS: Kuria Fog-Projection Lens
- Compliance: IP...
Description: - FOG LIGHTS: 2x Type C Morimoto XB LED (Square)
- Color: 5500K (Pure White)
- Input: Sealed 5202 Male
- WIRING: Plug-n-Play Connection Kit
- OPTICS: Kuria Fog-Projection Lens
- Compliance:...More Details »
Item #: LF90
Condition: New
Price: $238.50
2007.5-2024 GM Fleece All Lights On ModuleNew670875716810
- Installs in minutes
- Allows low beams and fog lamps to stay on when your high beams are active for better nighttime visibility in rural areas
- Low beams and Fogs operate normally when High Be...
Description: - Installs in minutes
- Allows low beams and fog lamps to stay on when your high beams are active for better nighttime visibility in rural areas
- Low beams and Fogs operate normally when High Beams are not on
Item #: FPE-ALO
Condition: New
Price: $21.95
3" Billet Aluminum Male V-Band FlangeNew
- V-Band Mating Flange for Hot Side Intercooler Pipe
- Mates with WCFab Weld-On S300SXE Turbo Compressor Outlet Cone or Duramax VGT / VVT Outlet Flange
- CNC machined billet aluminum
- Made in...
Description: - V-Band Mating Flange for Hot Side Intercooler Pipe
- Mates with WCFab Weld-On S300SXE Turbo Compressor Outlet Cone or Duramax VGT / VVT Outlet Flange
- CNC machined billet aluminum
- Made in USA
Item #: WCF205-121
Condition: New
In Stock. Ships in 3-5 business days.
Price: $36.00
Air Filter 4" Inlet (Dry)New
- Correct Replacement Dry Air Filter for WCFab 4" Intake kits and S300 Turbo Single Install Kits
- Dry Air Filter 4" Inlet
- Airflow comparable to cotton filters
- Exceptional filtration keeps y...
Description: - Correct Replacement Dry Air Filter for WCFab 4" Intake kits and S300 Turbo Single Install Kits
- Dry Air Filter 4" Inlet
- Airflow comparable to cotton filters
- Exceptional filtration keeps...More Details »
Item #: WCF100717
Condition: New
In Stock. Ships in 3-5 business days.
Price: $72.00
Air Filter 4" Inlet Multipack (Dry) - QTY 8New
- 8 Pack of 4" Air Filters
- Correct Replacement Dry Air Filter for WCFab 4" Intake kits and S300 Turbo Single Install Kits
- Dry Air Filter 4" Inlet
- Airflow comparable to cotton filters
- Ex...
Description: - 8 Pack of 4" Air Filters
- Correct Replacement Dry Air Filter for WCFab 4" Intake kits and S300 Turbo Single Install Kits
- Dry Air Filter 4" Inlet
- Airflow comparable to cotton filters
-...More Details »
Item #: WCF100717-8
Condition: New
In Stock. Ships in 3-5 business days.
Price: $549.00
Air Filter 5" Inlet (Dry)New
- Correct Replacement Dry Air Filter for WCFab 5" Air Intakes, Twin Turbo and S400 Single Turbo Install Kits
- Dry Air Filter 5" Inlet
- Airflow comparable to cotton filters
- Exceptional filtra...
Description: - Correct Replacement Dry Air Filter for WCFab 5" Air Intakes, Twin Turbo and S400 Single Turbo Install Kits
- Dry Air Filter 5" Inlet
- Airflow comparable to cotton filters
- Exceptional...More Details »
Item #: WCF100719
Condition: New
In Stock. Ships in 3-5 business days.
Price: $72.00
Air Filter 5" Inlet Multipack (Dry) - QTY 8New
- 8 Pack of 5" Air Filters
- Correct Replacement Dry Air Filter for WCFab 5" Air Intakes, Twin Turbo and S400 Single Turbo Install Kits
- Dry Air Filter 5" Inlet
- Airflow comparable to cotton f...
Description: - 8 Pack of 5" Air Filters
- Correct Replacement Dry Air Filter for WCFab 5" Air Intakes, Twin Turbo and S400 Single Turbo Install Kits
- Dry Air Filter 5" Inlet
- Airflow comparable to cotton...More Details »
Item #: WCF100719-8
Condition: New
In Stock. Ships in 3-5 business days.
Price: $549.00
AutoMeter OBD-II Signal Splitter/AdapterNew046074053238
-Connects to existing vehicle OBD-II port providing remote mount connections to mount additional devices.
-10 inch straight through leads with strain reliefs between 16 pin male and 16 female conn...
Description: -Connects to existing vehicle OBD-II port providing remote mount connections to mount additional devices.
-10 inch straight through leads with strain reliefs between 16 pin male and 16 female...More Details »
Item #: 5323
Condition: New
Price: $40.00
BHP 01-10 GM 2500 / 3500 BEHIND Roll Pan 2 inch Hidden Receiver HitchNew
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- All necessary hardware included
- Requires Frame Modification / Trimming for Installation
Description: - SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- All necessary hardware included
- Requires Frame Modification / Trimming for Installation
Item #: BHP1015, BHP1029
Condition: New
In Stock. Ships in 3-5 business days.
Price: $529.00
BHP 07.5-10 GM Long Box BELOW Roll Pan 2 inch Receiver HitchNew
*LONG BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: *LONG BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1035
Condition: New
In Stock. Ships in 3-5 business days.
Price: $529.00
BHP 07.5-10 GM Stock Bumper 2.5 inch Receiver HitchNew
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: - SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1004, BHP1005
Condition: New
In Stock. Ships in 3-5 business days.
Price: $529.00
BHP 07.5-19 LMM / LML / L5P GM Short Bed BELOW Roll Pan 2 inch Receiver HitchNew
*SHORT BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: *SHORT BOX ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1034
Condition: New
In Stock. Ships in 3-5 business days.
Price: $495.00
BHP 07.5-19 LMM / LML / L5P GM Short Bed BELOW Roll Pan 2.5 inch Receiver HitchNew
*SHORT BED ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Description: *SHORT BED ONLY*
- SAE J684-05 certified
- Class 4+ Receiver
- Complete bolt in design
- No cutting or welding required
- All necessary hardware included
Item #: BHP1031
Condition: New
In Stock. Ships in 3-5 business days.
Price: $529.00
BHP Clamp On Sled Stops - BEHIND Roll PanNew
- Protect your trucks sheet metal from damage
- Clamps to any of our BEHIND roll pan receiver hitches
- All necessary hardware included
Description: - Protect your trucks sheet metal from damage
- Clamps to any of our BELOW roll pan receiver hitches
- All necessary hardware included
Item #: BHP3000
Condition: New
In Stock. Ships in 3-5 business days.
Price: $259.00
BHP License Plate Mount BracketNew
- Includes component for BHP 2" or 2.5" receiver behind roll pan hitches
- Includes hardware for mounting license plate to bracket
- Easy to install with basic hand tools
- Made in USA
Description: - Includes component for BHP 2" or 2.5" receiver behind roll pan hitches
- Includes hardware for mounting license plate to bracket
- Easy to install with basic hand tools
- Made in USA
Item #: BHP4009
Condition: New
In Stock. Ships in 3-5 business days.
Price: $89.00
Billet Aluminum Competition Kill SwitchNew
- Universal Kill Switch for Competition Pulling Vehicles to cut ground wire circuit of Ignition, Fuel pumps, ECMs, or any other required electronic device kill to be operated by pulling sled
- Hig...
Description: - Universal Kill Switch for Competition Pulling Vehicles to cut ground wire circuit of Ignition, Fuel pumps, ECMs, or any other required electronic device kill to be operated by pulling sled
-...More Details »
Item #: BHP4010
Condition: New
In Stock. Ships in 3-5 business days.
Price: $189.00
Billet Aluminum Coolant Tank Cap, Black AnodizedNew
- Replacement cap for WCFab Coolant Tank
- Black Anodized Finish
Description: - Replacement Cap for WCFab Coolant Tank
- Clear Anodized Finish
Item #: WCF100472
Condition: New
In Stock. Ships in 3-5 business days.
Price: $39.00
Billet Aluminum S400 Compressor Outlet Flange for 3.5" PipeNew
- Compressor Outlet V-Band Mating Flange for Borg Warner S400 Style Turbos
- Sized for 3.5 in. Pipe
- Clamp, and O-Ring Seal Sold Separately
- CNC Machined from Billet Aluminum
- Made in USA
Description: - Compressor Outlet V-Band Mating Flange for Borg Warner S400 Style Turbos
- Sized for 3.5 in. Pipe
- Clamp, and O-Ring Seal Sold Separately
- CNC Machined from Billet Aluminum
- Made in USA
Item #: WCF205-66
Condition: New
In Stock. Ships in 3-5 business days.
Price: $38.00
Billet Aluminum S400 Turbo Compressor Outlet Flange for 3" PipeNew
- Compressor Outlet V-Band Mating Flange for Borg Warner S400 Style Turbos
- Clamp, and O-Ring Seal Sold Separately
- CNC Machined from Billet Aluminum
- Made in USA
Description: - Compressor Outlet V-Band Mating Flange for Borg Warner S400 Style Turbos
- Clamp, and O-Ring Seal Sold Separately
- CNC Machined from Billet Aluminum
- Made in USA
Item #: WCF205-65
Condition: New
In Stock. Ships in 3-5 business days.
Price: $38.00
Billet ORB Fill Plug for WCFab Rear Differential CoversNew
- O-RING SEAL PLUG FOR #16 (1 inch) ORB Thread (O-Ring Boss)
- 3/4” Hex Head Socket Drive
- For use with WCFab Differential Covers
- CNC Machined Billet Plug
- Made in USA
- Black or Clear A...
Description: - O-RING SEAL PLUG FOR #16 (1 inch) ORB Thread (O-Ring Boss)
- 3/4” Hex Head Socket Drive
- For use with WCFab Differential Covers
- CNC Machined Billet Plug
- Made in USA
- Black or Clear Anodized Finish
Item #: WCF205-459
Condition: New
In Stock. Ships in 3-5 business days.
Price: $25.00
Billet Steel S400 Turbo Compressor Outlet Flange for 3.5" PipeNew
- Compressor Outlet V-Band Mating Flange for Borg Warner S400 Style Turbos
- Sized for 3.5 in. Pipe
- Clamp, and O-Ring Seal Sold Separately
- CNC Machined from Billet Steel
- Made in USA
Description: - Compressor Outlet V-Band Mating Flange for Borg Warner S400 Style Turbos
- Sized for 3.5 in. Pipe
- Clamp, and O-Ring Seal Sold Separately
- CNC Machined from Billet Steel
- Made in USA
Item #: WCF205-68
Condition: New
In Stock. Ships in 3-5 business days.
Price: $34.00
Driver Side Transmission Dipstick TubeNew
Allison Driver Side Transmission Dip Stick Tube for 2001-10 Duramax
Description: - Aluminum Fabricated Cover
- Stainless Hardware
- Fill Plug
- Custom Powder Coat Finish
- Made in USA
Item #: WCF100113
Condition: New
WCFab Red, Gloss White, and Gloss Black in stock and ships in 3-5 business days. 10-15 business day lead time on other colors.
Price: $374.00
Edge EAS Competition KitNew810115012320
98617 - EAS Competition Kit includes:
- EAS Starter Kit
- EAS EGT Probe
- EAS Universal 5 Volt
- EAS 0-100 PSIg Pressure Sensor
- EAS -40F to 300F Temperature Sensor
Description: 98617 - EAS Competition Kit includes:
- EAS Starter Kit
- EAS EGT Probe
- EAS Universal 5 Volt
- EAS 0-100 PSIg Pressure Sensor
- EAS -40F to 300F Temperature Sensor
Item #: 98617
Condition: New
Price: $491.95
Sale: $442.95
Save: 10%
Save: $49.00
Edge EAS EGT Kit (Daily Driver/Tow Kit)New810115013068
EAS EGT Kit (Daily Driver/Tow Kit)
Includes the EAS Starter Cable and EGT Probe.